PCM23 is a new high-efficiency and high-power switching power amplifier. Compared with the previous products, it has a breakthrough improvement in sound quality, which will bring you a new listening enjoyment. Using the second-generation Class I™ circuit topology, it maintains the style of a pure analog amplifier, while having high efficiency similar to Class D; using the third-generation regulated switching power supply, it can maintain stability even when the input voltage fluctuates greatly. Strong power output.
- Using AI plug-in technology, so that each component has enough margin; in harsh environments, it can better resist the influence of accumulated dust on the circuit;
- The power tube is directly installed on the radiator (no mica sheet and other medium insulation and heat conduction) to reduce the thermal resistance of the power tube, which can effectively reduce the instantaneous high temperature of the power tube;
- High-quality adjustable potentiometers are selected to minimize the connection wires and interfaces between modules.
- Efficient Class I™ amplifier modules.
- The independent channels on the front panel have warning lights for temperature, protection and peak clipping.
- Individual channel power indicators and -5dB / -10dB / -20dB signal indicator indicators on the front panel.
- There is an input sensitivity selection on the rear panel.
- There is a connection mode selection (stereo/bridge/parallel) on the rear panel.
- High-quality adjustable potentiometers are selected to minimize the connection wires and interfaces between modules.
| model number | PCM23 |
|---|---|
| Power: (the output power of each channel loaded at the same time under the stable power supply of 220V~50Hz THD=1%)< /th> | |
| 8Ω stereo power | 2300W x2* |
| 4Ω stereo power | 3900W x2** |
| 2Ω stereo power | 6000W x2** |
| 8Ω bridge power | 6200W** |
| 4Ω bridge power | 10000W** |
| Other data | |
| frequency response | 20Hz-20kHz(+0/-1.5dB) |
| Total Harmonic Distortion | ≤0.05% |
| Signal to Noise Ratio (A) | ≥90dB |
| Input sensitivity | 0.775V/1.0V/1.4V/38dB/32dB/26dB |
| Input impedance (balanced/unbalanced) | 20kΩ/10kΩ |
| Voltage Gain | 44.8dB |
| Output category | Class I™ |
| cooling | Blowing from back to front |
| Link | |
| Input section | Balanced input XLR female socket/balanced parallel XLR male socket |
| Output section | SPEAKON (speaker screw seat) |
| Function | |
| Front panel indicator | Power indication/input level/peak clipping voltage indication/VHF/protection indication/over temperature protection |
| Front panel | Power switch/volume control knob |
| Back panel | Stereo/parallel/bridge selection switch, sensitivity selection switch, pressure limit switch |
| Size and Weight | |
| Product Dimensions (mm) | 483x448x89 |
| Outer packaging size (mm) | 595x565x170 |
| Gross weight | 15.7kg |
REMARK:
1. The power is measured according to EIA standard.
2. **, the power is measured using 1kHz sine wave with 20ms pulse at 1% total harmonic distortion.
3. *, the power is measured using 40ms pulsed 1kHz sine wave at 1% total harmonic distortion.
4. SOUNDSTANDARD reserves the right to interpret the above parameters. The parameters are subject to change without prior notice. The final parameters are subject to the product manual.