TX series

The TX series of power amplifiers by SAE Audio are a ver y versatile and efficient yet affordable option for those requiring an all-purpose device. Implementing Power Factor Correction technology along with Universal Mains Regulated SMPS power supply and Class D power modules the TX series combines in the same amplifier all the functional requirements found on most sound reinforcement applications.

Features

  • Class D（TX800-TX3600）and Class I™（TX5200）power modules.
  • Factor Correction technology and Universal Mains R-SMPS（TX800-TX3600）.
  • XLR signal input and SpeakON Nl4.
  • Input sensitivity selector on the back panel (0.775V / 1V / 32dB).
  • Routing mode selector on the back panel (stereo / bridge / parallel).
  • Mains circuit breaker on the back panel (only TX5200).
  • Channel independent protection and clip warning indicators on the front panel.
  • Channel independent power and -5dB/-10dB/-20dB/signal presence indicators on the front panel.
  • Low unit weight (TX800-TX3600).

Specifications

Model TX800 TX1200 TX2400 TX3600 TX5200
Output power (AC 220V / 50Hz. ±10％, All channels driven output power, THD=1%)
8Ω stereo 300W x2* 500W x2* 700W x2* 1000W x2* 1500W x2
4Ω stereo 500W x2** 850W x2** 1250W x2** 1750W x2** 2500W x2*
2Ω stereo 750W x2** 1250W x2** 1600W x2** 2250W x2** 3300W x2*
8Ω bridge 1000W** 1700W** 2500W** 3500W** 5000W*
4Ω bridge 1500W** 2500W** 3200W** 4500W** 6000W*
Other specification
Frequency response 20Hz-20KHz(+0/-1dB)
THD+N ≤0.15% ≤0.15% ≤0.15% ≤0.15% ≤0.05%
S/N rate ≥100dB ≥100dB ≥100dB ≥100dB ≥85dB
Damping factor ≥500 ≥500 ≥500 ≥500 ＞200
Input sensitivity 0.775V/1.0V/32dB
Input impedance(bal/unbal) 20kΩ/10kΩ
Voltage gain (8 ohm） 36.0dB 38.2dB 39.7dB 41.2dB 43dB
Output circuitry Class D Class D Class D Class D Class ITM
Dimension / Weight
Product Dimension(mm) 483x305.5x89 483x305.5x89 483x305.5x89 483x305.5x89 483x468x133
Packaging Dimension(mm) 560x420x170 560x420x170 560x420x170 560x420x170 620x585x210
G.W. 7.3kg 7.6kg 8kg 8.6kg 31.6kg
Remark：
1、*,The power is tested under the condition of 40ms burst,1kHz sine wave and 1% THD.
2、**,The power is tested under the condition of 20ms burst,1kHz sine wave and 1% THD.
3、Other power is tested under EIA standard.
4、SAE reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.