CA+， the new definition of transformer power amplifier.
- Class ITM power modules.
- Power Factor Correction technology and Universal Mains R-SMPS.
- XLR signal input and SpeakON Nl4.
- Input sensitivity selector on the back panel (0.775V / 1V / 32dB).
- Routing mode selector on the back panel (stereo / bridge / parallel).
- Link mode selector (1-in 4-out / 2-in 4-out).
- Channel independent protection and clip warning indicators on the front panel.
- Channel independent power and -5dB/-10dB/-20dB/signal presence indicators on the front panel.
| Model | CA20+ | ||
| Output power (AC 220V / 50Hz. ±10％, All channels driven output power, THD=1%) | |||
| 8Ω stereo | 2000W x2 | ||
| 4Ω stereo | 3200W x2* | ||
| 2Ω stereo | 4200W x2* | ||
| 8Ω bridge | 6400W* | ||
| 4Ω bridge | 7200W* | ||
| Other specification | |||
| Frequency response | 20Hz-20kHz(+0/-0.5dB) | ||
| THD+N | ＜0.1% | ||
| S/N rate | ≥80dB | ||
| Damping factor | ＞280 | ||
| Crosstalk | ≥70dB | ||
| Input sensitivity | 0.775V/1.0V/32dB | ||
| Input impedance(bal/unbal) | 20kΩ/10kΩ | ||
| Voltage gain (8 ohm） | 44.2dB | ||
| Output circuitry | Class I™ | ||
| Dimension / Weight | |||
| Dimension / Weight | 483x497x133 | ||
| Packaging Dimension(mm) | 620x585x210 | ||
| G.W. | 39.8kg | ||
| The above packing dimensions, net weight, and gross weight are for reference only. The accurate values are subject to the identification on the batch of products. | |||
Remark：
1、*,The power is tested under the condition of 40ms burst,1kHz sine wave and 1% THD.
2、**,The power is tested under the condition of 20ms burst,1kHz sine wave and 1% THD.
3、Other power is tested under EIA standard.
4、SAE reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.